The old cadence sensor required a magnet affixed to the crank and a transmitting unit located on the lower frame arm. Both required tight tolerances and easily could get out of alignment due to bumps or whatever. The new unit attaches to the left crank arm and can't get out of alignment. The speed sensor worked off the real wheel magnet and cadence/speed sensor. Again, the unit required tight tolerances and easily could be dislodged and require adjustment. The new speed sensor is great as it attaches to either hub and requires no further adjustment. Both units pair well with my Garmin Edge 500.
Needed to add sensors to new bike,already have these on another bike and they work great,price was right so I picked up another set. both sets are working just fine with my old GARMIN FORERUNNER XT tri watch. Very easy to set up.
Gives me cadence, that�s what I miss, easy to install and pair with my device. Works great on my gravel bike
Great for tracking rides with a compatible device - I use a Garmin watch paired with these. It's good especially to get a sense for how cadence is and how it correlates with heart rate and things of that nature. Simple, reasonably-priced bit of cycling gear :)
Great! Easy to install on the bike and connected with my Garmin 810 pretty quickly, once I figured out the correct settings. Comes with full batteries, and started up and had been working reliably since.
I was using the magnetic version of the cadence sensor. Had to deal with the magnet placement as well as plastic straps to hold the sensor in place. The speed and cadence sensor bundle avoids the magnets and was very easy to install. Also, easy to link to my bike computer Apps.
I transitioned to an indoor trainer this January for Zwift. I have an old Garmin Edge 800 that is stuck in the dark ages with only ANT.
This sensor has both ANT and Bluetooth and makes connecting to Zwift a snap.
I moved the old ANT sensors to my commuting bike and just move the computer depending upon if I am indoors or outdoors.
My old sensors were not working consistently after many years of use. The new ones are working great, as expected!
These are working great on my stationary bike! The Cadence showed exactly what I was getting while using the Moov cadence ankle sensor (btw- Moov is more accurate for swimming than my Garmin 935!). The speed sensor is rigged on the front freewheel and I am satisfied with the speedmile readings even though it's not on a actual 700cx23 hub like it's designed to be.
It is very easy to use, and pair with my Edge 520 plus and watch without any problem.
Like the new version which supports blue tooth, make it very flexible to connect to different devices. (Haven't tried the blue tooth feature yet, but definitely can pair with my phone)
These sensors have been the same for a number of years now. Adding them as I add bikes and they are easier to install than ever. One of two may had a dead battery so I changed it before attaching to the bike. Always have a couple of 2032 batteries on hand for your bike stuff.
Does what it says, pairs right away. excellent product. Don't use that often given power meters cadence and GPS and Headunit. but if you don't have those, this is a must.
Kit is very easy to install and works flawlessly!
The best bundle for the money !!!!
Order shipped fast! great product!
We have 4 sets of these & about to order another set. Very easy to set up. Like how they work.
I've had this on my road bike (with Edge 1030) for 1 year and recently it started reporting speed in a "bouncing around" fashion: +/- 3-4 mph every second or so. Battery was changed and I used a voltmeter to ensure the replacement battery was good (previous battery still measured as good but replaced anyway). I switched between data recording "smart" and "every second" but the problem did not resolve. I turn it off when riding outside since the GPS is available but for inside riding this is bothersome. I also tried "auto" and "manual" for wheel size but the erratic reporting was still there regardless. The average speed at ride's end appears accurate so there's that. Just a nuisance.
Easy to install and user-friendly.
Ordered these to work with my new Karoo Hammerhead II and I was pleasantly surprised how easy they paired up together! They work great on my road bike, couldn't ask for anything more! Great price, super fast shipping, definitely scored! If you're in need of some sensors and are biking on a budget, these are the ones to grab!
Got it for a new (n+1) bike. Installed, it works. Simple.
